When we use electric actuators, we often encounter situations where the indicator light fails and affects the normal operation of the product. Then the following describes the failure phenomenon of the indicator light, and we will explain in detail the failure phenomenon of the electric actuator And workaround.
1. The indicator light is off
In life, when we use electric actuator products, we may encounter the phenomenon that the product indicator does not light up, so how should we solve it?
First, we must check whether the fuse inside the electric actuator has been damaged. If the fuse is not damaged, then comprehensive consideration can be inferred that there may be an abnormality in the power supply part of the servo amplifier, so it is necessary to check the electric The power indicator of the device is detected by a multimeter and it is found that the indicator switch is not closed, then the indicator needs to be replaced.
Two. Close does not work
After the motor is powered on normally, it can start normally, but it cannot be turned off.
For this phenomenon of electric actuators, we need to carefully check the wiring to see if the feedback circuit is abnormal, if it is confirmed that there is no abnormality in the feedback circuit. Comprehensive consideration is given to the failure phenomenon of the electric actuator. If the product is turned on when the signal is turned on, it indicates that the open circuit and indicator lights are normal, then it is necessary to focus on checking the closed part and turn off the signal to the electric actuator. The indicator light does not light up. This indicates a problem. It may be a problem with the indicator light. Use a multimeter to check whether the indicator light is open. If it is open, replace it with a new one. If the situation is serious, notify professional maintenance personnel for further testing and repair.
